Quantum 2 CIRCLE 16 Channel
The Quantum 2 CIRCLE 16 Channel is a frosted lensed aluminum channel fixture that is powered by Quantum 2 High Density 19 LED Tape Light. It is dimmable, suspended, and is perfect for lighting up kitchens, conference tables, and lobbies.
Where you can use the Quantum 2 CIRCLE 16 Channel:
- Kitchens
- Conference Rooms
- Lobbies
- Bathrooms
- Hallways
- Architectural Accents
Specifications
Part Number: CH-C-16-XXX-XX-XXXX-XX (see 3 Ways to Order)
Colors Available:
2700K Ultra Warm White
3000K Warm White
3500K Neutral White
4000K Daylight White
RGB Color-Changing
Lens Diffusion: 100% (No LEDs are visible)
Mounting: Suspended
Power Consumption: 8 Watts/Foot (RGB: 11 Watts/Foot)
Input Voltage: 24V DC
Dimming*: MLV, Incandescent, & 0-10V
Cut Length: Every 3-9/32″
Material: Anodized Aluminum
LED Chip: SMD 2835
Lamp Life: 50,000 Hours
Light Distribution: 118°
Max Length: 8.2 Feet
Dimensions WxH: 1.6″ Diameter
Operating Temp.: 32°F to 122°F (0°C to 50°C), Relative Humidity
Environment: Indoor, Damp
Certifications: cUL Listed & UL Listed
Warranty: 5 Year Limited
*See the compatible dimmable drivers under Compatible Accessories below.
Lighting Data
Brightness
Lumens Per Foot & Efficacy
- 4000K: 693 lm/ft & 87 lm/W
- 3500K: 682 lm/ft & 85 lm/W
- 3000K: 660 lm/ft & 82 lm/W
- 2700K: 601 lm/ft & 75 lm/W
Color Quality
CRI (Ra), Fidelity (Rf), & Gamut (Rg)
- 4000K: 90+ CRI, 93 Rf, & 103 Rg
- 3500K: 90+ CRI, 93 Rf, & 103 Rg
- 3000K: 90+ CRI, 93 Rf, & 103 Rg
- 2700K: 90+ CRI, 93 Rf, & 103 Rg
Color Consistency
applies to all color temperatures:
- MacAdam Ellipses: 4
- Kelvin Tolerance: +/- 100K
3 Ways to Order Quantum Channel 2
Option 1: Fixture Kit
An unassembled kit that includes an 8′ 2-7/16″ foot channel, frosted lens, High Density LED tape light, driver, end caps, & surface mount or recessed mounting hardware parts to build your own lighting fixture.
#CH-C-16-KIT-[COLOR]-[DRIVER]-[SUS. KIT #]
COLOR Options:
27 (2700K)
30 (3000K)
35 (3500K)
40 (4000K)
RGB (Color-Changing)
DRIVER Options:
M120 (MLV & Incandescent TRIAC Dimmable 120V AC Input UL-Listed) (Not for RGB!)
NDIM (Electronic Non-Dimmable 120-277V AC Input UL-Listed)
010V (Electronic 0-10V Dimmable 120-277V AC Input UL-Listed)
NONE* (No Driver Included)
SUS. KIT Options:
Choose a suspension kit (#0 to #24) from this page:
See the Suspension Kits list
Note: Option “#0” is for No Suspension Kit.
Sample Part Number:
#CH-C-16-KIT-27-M120-6
Notes
*Driver Note:
If you want to use one driver to power more than one fixture then select the “NONE” driver option and order a driver separately. Contact our Serve Team (832-717-2710 or designs@ledinspirations.com) to assist you with your project.
Accessories Note:
All Quantum 2 Accessories such as RGB Components, Remotely-Located Drivers, & Channel Extension Pieces must be purchased separately.
Certifications Note:
All the Drivers we use to power the Quantum 2 Channel are Class 2 compatible and cUL Listed & UL Listed.
Option 2: Standard Fixture
Standard preassembled lighting fixture with driver & mounting hardware (except suspension kits). Available in 2 foot, 4 foot, 6 foot, & 8 foot standard lengths.
#CH-C-16-[LENGTH]-[COLOR]-[DRIVER]-[SUS. KIT #]
LENGTH Options:
2FT (1′ 11-1/2″ Exact Optimized Length*)
4FT (3′ 10-7/16″ Exact Optimized Length*)
6FT (5′ 9-13/32″ Exact Optimized Length*)
8FT (7′ 11-5/8″ Exact Optimized Length*)
COLOR Options:
27 (2700K)
30 (3000K)
35 (3500K)
40 (4000K)
RGB (Color-Changing)
DRIVER Options:
M120 (MLV & Incandescent TRIAC Dimmable 120V AC Input UL-Listed) (NOT FOR RGB!)
NDIM (Electronic Non-Dimmable 120-277V AC Input UL-Listed)
010V (Electronic 0-10V Dimmable 120-277V AC Input UL-Listed)
NONE** (No Driver Included)
SUS. KIT Options:
Choose a suspension kit (#0 to #24) from this page:
See the Suspension Kits list
Note: Option “#0” is for No Suspension Kit.
Sample Part Number:
#CH-C-16-8FT-RGB-NDIM-6
Notes
*Length Note:
In order to minimize shadow spots and create a more beautiful look we build each standard fixture to an exact optimized length.
Standard Fixture Build Details:
Standard Fixtures are built with these standard specs (for other options see our Custom Fixture):
Left & Right Side Cuts: 90° Cut with End Cap
Power Wire Exit: Right End – Back of Fixture
Channel Color: Aluminum
**Driver Note:
If you want to use one driver to power more than one fixture then select the “NONE” driver option and order a driver separately. Contact our Serve Team to assist you with your project.
Accessories Note:
All Quantum 2 Accessories such as RGB Components, Remotely-Located Drivers, & Channel Extension Pieces must be purchased separately.
Option 3: Custom Fixture
Custom preassembled lighting fixture with driver & mounting hardware. This fixture can have a custom length, custom cut, & can be powder coated to one of 192 RAL colors.
Go to: ledi.lighting/custom to build your own Quantum Channel 2 Custom Fixture.
Or Contact our Serve Team for help with your Custom Quantum Channel 2 project.
Downloads
*Quantum IES files are 1ft fixtures in 4000K
Compatible Accessories
CIRCLE 16 Channel Accessories
- Quantum 2 Suspension Kits:
#CH-CANOPY-XX-XX-XXX - Quantum 2 Extending Connector:
#CH-CON2 - Extra End Caps:
#CH-END-C-16 - Extra Frosted Lens:
#CH-LENS-9
Mounting & Wiring Accessories
Drivers
- Hybrid 120VAC MLV & Incandescent Dimmable Drivers:
20W, 40W, 60W, & 96W - Magnetic 120VAC MLV Dimmable Drivers:
20W, 40W, 60W, 96W, 150W, 192W, 200W, 288W, & 300W - Electronic 120-277VAC 0-10V Dimmable Drivers:
25W, 60W, 100W, 150W, 200W, 240W, 320W, & 600W - Electronic 120-277VAC Non-Dimmable Drivers:
25W, 60W, 100W, 150W, 200W, 240W, 320W, & 600W - Magnetic 277VAC MLV Dimmable Drivers:
20W, 40W, 60W, 96W, 150W, & 200W
Residential RGB RF Components
- RGB M3 RF Controller (Single Zone):
#RGB-RF-CONT-M3 - RGB M3 RF Amplifier:
#RGB-RF-AMP-M3 (Extend an M3 RGB tape light run) - RGB T3M RF Controller (10 Zones):
#RGB-RF-CONT-T3M - RGB T3 RF Amplifier:
#RGB-RF-AMP-T3 (Extend an T3M RGB tape light run)
Commercial RGB DMX Components
- RGB DMX STICK CU4 Controller (Single Zone):
#RGB-DMX-CONT-STICK-CU4 - RGB DMX STICK 3 Controller (10 Zones):
#RGB-DMX-CONT-STICK3 - RGB DMX Decoder:
#RGB-DMX-DECODER (Connect RGB LED tape light runs to an RGB DMX controller) - RGB DMX XLR to RJ45 Adapters:
#RGB-DMX-XLRM-RJ45 & #RGB-DMX-XLRF-RJ45 (Connect 3-Pin XLR to RJ45) - RGB DMX Terminator:
#RGB-DMX-TERM (Terminate the DMX signal in the last of 4 or more decoders)